Danfoss PAHT G 10-12.5 Disassembling And Assembling Instructions - Page 5

Browse online or download pdf Disassembling And Assembling Instructions for Water Pump Danfoss PAHT G 10-12.5. Danfoss PAHT G 10-12.5 20 pages.

Print Page

Service guide | Disassembling and assembling PAH 10-12.5, PAHT 10-12.5 and PAHT G 10-12.5

13. Loosen the valve plate using two

screwdrivers. Place one of the

screwdrivers in the slot of the valve plate.

15. Remove the five O-rings and the five

back-up O-rings.

17. Wash all parts and replace all seals

(inclusive shaft seal).

19. If the pump has failed, the reason for the

failure must be found and fixed before the

repaired pump is re-installed.

180R9095 | 521B0986 0 | DKCFN.PI.010.NA4.02| 06.2017

14. Remove the valve plate.

16. Remove the port plate from the flange.

18. Inspect all parts carefully (see "Inspection")

and replace any worn parts.