Dunlop GEEZER CRY BABY GZR95 WAH Setup - Page 2
Browse online or download pdf Setup for Music Pedal Dunlop GEEZER CRY BABY GZR95 WAH. Dunlop GEEZER CRY BABY GZR95 WAH 2 pages. Bass pedal
Print Page
GZR95
GEEZER BUTLER CRY BABY
POWER
SETUP INSTRUCTIONS
• Run an instrument cable from your
The Geezer Butler Cry Baby Wah is
guitar to the GZR95's INSTRUMENT
powered by one 9-volt battery (accessed
jack and another instrument cable from
via the bottom of the pedal), an AC adapter
the GZR95's AMPLIFIER jack into your
such as the Dunlop ECB003, or the MXR
DC Brick
and Iso-Brick
power supplies.
amplifier's input.
™
™
• The GZR95 is bypassed (turned off)
INTERNAL CONTROLS
whenever your foot is off the pedal.
To turn it on, simply press toe of rocker
•
Q knob adjusts frequency width of
down with your foot.
wah effect
•To access internal controls, remove
AUTO-RETURN DELAY sets how
•
bottom plate.
long effect rings out after rocker
returns to heel position
• Rotate the Q knob clockwise for a
narrower frequency range and more pro-
nounced wah effect or counterclockwise
for a wider frequency range and subtler
wah effect.
WAH
®
• To increase effect ring-out time, remove
bottom plate and rotate AUTO-RETURN
DELAY pot counterclockwise (set to
12 o'clock by default). To decrease
effect ring out time, rotate the
control clockwise.
• Rock your foot back and forth on
the pedal to hear the vocal, expressive
tones that the Cry Baby Wah is
famous for.
SPECIFICATIONS
Impedance
Input
230 KΩ
Output
1 kΩ
Resonant Frequency
Heel Down
400 Hz
Toe Down
2000 Hz
Output Characteristics
Heel Down Gain*
+16 db / 0 dB
Toe Down Gain*
+17.5 dB / +14.5 dB
Bypass
Automatic
Buffered
Delay**
45ms to 560ms
Delay Factory Preset
290ms
Noise Floor***
Bypass
-102 dBV
Heel Down (Effect On)
-99 dB
Toe Down
-90 dBV
Current Draw
2.75 mA
*Q ADJ full CW/CCW
** AUTO-RETURN DELAY ADJ full CW/CCW
*** A-weighted, Q ADJ to 1 o'clock factory setting,
0 dBV = 1VRMS
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658