Dunlop EP101 Brochure & Specs - Page 2
Browse online or download pdf Brochure & Specs for Amplifier Dunlop EP101. Dunlop EP101 2 pages. Preamp
Print PageEP101 ECHOPLEX
®
DESCRIPTION
POWER
• The EP-3's legendary tone
The Echoplex
by one 9-volt battery (remove
conditioning mojo in a Phase
bottom plate to install), a 9-volt
90-sized box
AC adapter such as the Dunlop
• Adds up to +11dB of gain
ECB003/ECB003E, or a DC Brick
• Warm, light overdrive at
power supply
higher levels
• True Bypass
CONTROLS
GAIN knob controls amount of
gain added to signal
FOOTSWITCH toggles effect on/
bypass (blue LED indicates on)
PREAMP
DIRECTIONS
®
Preamp is powered
• Run a cable from your guitar to
the Echoplex Preamp's INPUT
jack and run another cable from
the Echoplex Preamp's OUTPUT
jack to your amplifier.
™
.
• Start with the GAIN control at
Position 5 (+0dB).
• Turn the effect on by depressing
the footswitch.
• Rotate the GAIN knob clockwise
to increase gain (up to +11dB) or
counterclockwise to decrease it.
• Starting at position 7, the
Echoplex Preamp will produce
light overdrive clipping.
TONE CONDITIONING TIPS
SPECIFICATIONS
• Start with the Echoplex Preamp
Input Impedance
at the end of your effects chain.
Output Impedance*
In this position, the EP101 will
Max Input Level
sweeten up the sound of the
Max Output Level
entire chain and also act as a
Noise Floor**
buffer.
Max Gain
• For a different sound, try placing
Bypass
the EP101 after your gain pedals
(boost, overdrive, distortion,
Current Draw
fuzz) but before your modulation
Power Supply
pedals (phaser, flanger, chorus,
*Gain at middle position
delay, etc.).
**A-weighted, Gain at maximum
clockwise position
• To use the EP101 as a true
preamp, or as a lead boost,
put it at the beginning of your
effects chain.
730 kΩ
55 kΩ
-5 dBV
+5.5 dBV
-95 dBV
+11 dBV
True Hardwire
12 mA
9 volts DC
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658