Casio STR-600 Service Manual & Parts List - Page 4

Browse online or download pdf Service Manual & Parts List for Watch Casio STR-600. Casio STR-600 16 pages.

Print Page
Casio STR-600 Service Manual & Parts List

2. OPERATION CHART: MODULE QW-2634

Getting Acquainted
Congratulations upon your selection of this CASIO watch. To get the most out of your
purchase, be sure to carefully read this manual and keep it on hand for later reference
when necessary.
Expose the watch to bright light to charge its battery before using it.
You can use this watch even as its battery is being charged by exposure to bright
light.
•
Be sure to read "Battery" of this manual for important information you
need to know when exposing the watch to bright light.
If the digital display of the watch is blank...
If the SLEEP indicator is on the display (either flashing or
steady), it means that the display is blank because the
watch's Power Saving function has turned off the display
to conserve power.
Power Saving automatically turns off the display and
enters a sleep state whenever the watch is left for a
certain period where it is dark.
•
The initial factory default setting is Power Saving on.
•
The watch recovers from the sleep state if you move it to
a well-lit area
the watch towards your face for reading.
*
It can take up to two seconds for the display to turn
on.
•
See "Power Saving Function" for more information.
General Guide
•
D
Press
to change from mode to mode.
•
In any mode (except for the Recall Mode), press
Timekeeping Mode
D
Press
.
Timekeeping
Use the Timekeeping Mode to set and view the current time and date. The
Timekeeping Mode also has a Dual Time screen that lets you view the current time in
Kona, Hawaii, which is the site of the Ironman Triathlon.
•
C
In the Timekeeping Mode, press
to toggle between the Date and the Dual Time
screens.
Date
Hour : Minutes
PM indicator
Seconds
Press
Month – Day
Day of week
Setting the Time and Date
When setting the time, you can also configure settings for the display illumination
duration, the 12/24-hour format, power saving on/off, and the Dual Time screen.
About the Dual Time screen
The Dual Time screen is initially set up to show the time in Kona, Hawaii, which is the
site of the Ironman Triathlon. You can leave this setting the way it is or change it to
show the current time in another time zone.
•
If you need to adjust the current Kona time setting, use the "Time Differential Table"
for reference. If you live in Tokyo for example, you would need to subtract 19 hours
from the current Tokyo time to determine the current time in Kona, Hawaii. Note that
the times in the "Time Differential Table" are standard times. You need to subtract
one hour from these times during periods when summer time (Daylight Saving Time)
applies.
•
You can also use the Dual Time screen to keep track of the current time in another
area outside of the Kona, Hawaii time zone. If you do, you should turn off
(Kona time zone indicator) on the Dual Time screen. This will cause the indicator to
be replaced by an indicator that shows the day of the week for the current date.
To set the time and date
1. In the Timekeeping Mode, hold down
seconds start to flash, which indicates the setting
screen.
D
2. Press
below to select other settings.
Seconds
Hour
Minutes
KOA/Day of
Minutes
Hour
the week
Dual time settings
3. When the setting you want to change is flashing, use
described below.
*
, if you press any button, or if you angle
L
to illuminate the display.
Stopwatch Mode
F:50
STW
Dual Time
C
.
Dual time
(Hour : Minutes)
Kona time
zone indicator
KOA
B
until the
to move the flashing in the sequence shown
12/24-Hour
Year
Format
Power
Day
Month
Saving
C
E
and
to change it as
About This Manual
•
Button operations are indicated using the letters shown
in the illustration.
•
Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the "Reference" section.
(Light)
Alarm Mode
ALM
To do this:
Screen
Reset the seconds to
P
Toggle the display illumination duration setting
10:58
50
between 1.5 seconds ( ) and 2.5 seconds ( )
6-30
Change the hour or minutes
Toggle between 12-hour (
12H
6-30
(
) timekeeping
24H
Change the year, month, or day
2004
6-30
Toggle power saving on (
SAVE
ON
Switch between the
KOA
DUAL
and
___
(day of the week)
Change the dual time hour or minutes
3:58
50
DUAL
KOA
4. Press
B
to exit the setting screen.
Stopwatch
The 1/100-second stopwatch measures elapsed time, as
1/100 second
Minutes
well as lap/split times. The Stopwatch Mode also includes
Seconds
a number of features and functions for the triathlete,
Hours
including lap/split time memory, auto-start, target splits,
leg (event) indicators, and more.
•
All of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing
•
See "Timing a Triathlon" for information about triathlon
functions.
Measuring Elapsed Time
Use the following procedure to perform a basic elapsed
time operation with the stopwatch.
F:50
STW
•
The stopwatch continues to run until you stop it. If the
elapsed time measurement reaches the maximum limit,
Timekeeping
Remaining
it will restart from zero.
Mode time
memory
To measure elapsed time
1. In the Stopwatch Mode, press
time measurement.
•
Starting an elapsed time operation displays the
elapsed time in the center of the display and in the
lower part of the display.
•
Note that pressing
operation while an auto-start countdown is being
performed. In this case, you need to stop the auto-
start countdown before starting the elapsed time
operation.
•
Elapsed time measurement continues even if you exit
the Stopwatch Mode.
2. To stop elapsed time measurement, hold down
about two seconds until the watch emits two short
beeps and then one long beep.
— 2 —
Recall Mode
Target Mode
Do this:
E
00
Press
.
C
Press
while the
seconds count is flashing.
E
C
Use
(+) and
E
) and 24-hour
Press
.
12H
E
C
Use
(+) and
ON
) and off (
OFF
)
E
Press
.
E
(Kona) indicator
Press
.
KOA
E
C
Use
(+) and
D
.
A
to start the elapsed
A
will not start an elapsed time
C
(–).
(–).
(–).
for