Dunster House MonkeyFort Wilderness 2 Installation Manual - Page 7

Browse online or download pdf Installation Manual for Play Sets & Playground Equipment Dunster House MonkeyFort Wilderness 2. Dunster House MonkeyFort Wilderness 2 20 pages.

Print Page

Step 2 - required components

1 of C40239A - 86x43x2350
1 of C40240A - 86x43x2500
28 of 4x50mm countersunk screw
Lay the items on the ground first and position the components before fixing. Make sure the grooves on the rungs are
facing the same direction as depicted. Fix components together using 4x50mm countersunk screws. Drive them through
(as shown in Figure 2) from top and bottom of the side parts (C40240A) into the rungs.
When pre-drilling, do not drill through the rungs.
Horizontal ladder (monkey bar assembly)
Pre-drill all screw holes with a 3mm drill bit.
Assembly Instructions for MonkeyFort Wilderness II
7 of C4038A - 44x44x550 - rungs
direction - grooves on the rungs
2350
2500
4x50mm
countersunk screw
4x50mm
countersunk screw
'Grooved' part of the rung needs
to be facing towards the ground.
43
43
550
Figure 2
10
Rung
10
C40240A - 86x43x2500
C4038A - 44x44x550 - rungs
C40239A - 86x43x2350
Page 6