Free Color W3610 User Manual - Page 4

Browse online or download pdf User Manual for DJ Equipment Free Color W3610. Free Color W3610 7 pages.

Print Page

-Make sure the lens are in good condition. It's recommended to replace the units if

there are any damages or severe scratch.

-Make sure the fixture is operated by qualified personnel who knows the fixture before

using.-Keep the original packages if any second shipment is needed.

-Don't try to change the fixtures without any instruction by the manufacturer or the

appointed repairing agencies.

-It is not in warranty range if there are any malfunctions from not following the user

manual to operate or any illegal operation, like

shock short circuit, electronic shock, lamp broke, etc.

3. Installation via clamp

Please refer to the picture below:

Screw one clamp each via a M12 screw and nut onto the Omega holders.

Insert the quick-lock fasteners of the first Omega holder into the respective holes on

the bottom of the device. Tighten the quick-lock fasteners fully clockwise. Install the

second Omega holder.

Pull the safety-rope through the holes on the bottom of the base and over the trussing

system or a safe fixation spot. Insert the end in the carbine and tighten the safety

screw.

4. DMX-512 control connections

Connect the provided XLR cable to the female 3-pin XLR output of your controller and

the other side to the male 3-pin XLR input of the moving head. You can chain multiple

Moving head together through serial linking. The cable needed should be two core,

screened cable with XLR input and output connectors. Please refer to the diagram

below.