DUO-FAST DFCR175C Operating Manual - Page 13

Browse online or download pdf Operating Manual for Power Tool DUO-FAST DFCR175C. DUO-FAST DFCR175C 18 pages. Cordless roofing coil nailer

Print Page

Preparing the Cordless Roofing Nailer for Use

Fasteners

The Duo-Fast

Cordless Roofing Nailer drives Roofer's

Choice

coil nails designed to be used with the tool.

The use of fasteners that do not meet Duo-Fast

dards could cause tool damage and will void all

warranty claims.

Loading Coil Nails

Step No. 1 – Grasp the nailer handle firmly with one

hand and with the other hand unlatch the magazine

cover clip. Swing the magazine door open.

Step No. 2 – Adjust the loading tray for nail length (if

required) by depressing the button on the post and

raising or lowering the tray to the desired position.

Step No. 3 – Remove the band from a nail coil and

place the nail coil in the magazine with the tips of the

nails against the loading tray and with about 4 inches

of coil unwound. Make sure the coil is centered over

stan-

the post.

Step No. 4 - Slide the free strip of nails along the top of

the feeder body assembly and place the first nail in the

nose of the tool with the head of the nail on the magnet.

Step No. 5 - Carefully close and latch the magazine door.

Step No. 6 - The nailer is now ready for use.