AUDIOBYTE Hydra Zap Owner's Manual - Page 9

Browse online or download pdf Owner's Manual for Power Supply AUDIOBYTE Hydra Zap. AUDIOBYTE Hydra Zap 14 pages.

Print Page

AUDIOBYTE

Pressing the - and + buttons allows the user to set a new target voltage for

the two supplies (actual voltage of the two rails does not change if Live is not

active).

If target voltage has been tuned, the Apply button becomes active. Press

the Apply button to set the target to both supply stages and store it as default

(outputs can be enabled or disabled).

Activate the Live mode so that the stage voltages follow the target voltage,

as it is tuned. Make sure that analog outputs are enabled in order to see the

changes on the load. Press apply to store the tuned value as default.

Press the button on the top-left to return to the menu screen. If voltage is

tuned and Apply is not pressed, when exiting the screen, all adjustments are

cancelled and the previous voltage level is applied.

The Hydra ZAP can be remotely controlled using a dedicated Android/iOS

app. Please search for the Audiobyte Hydra Remote app on Google Play or App

Store. Installing this app will give you the possibility to control the Audiobyte Hydra

VOX and Hydra HUB devices as well.

If app has connected successfully to the Hydra ZAP, the app version can be

seen in the BT App Ver field of the system information screen.

Firmware Update

Update of the control firmware is done via the remote-control app. When a

new firmware version is available, the user is informed by the app, when the Hydra

ZAP is in stand-by.

Hydra ZAP Owner's Manual