AudioCodes 420HD Quick Manual - Page 2
Browse online or download pdf Quick Manual for IP Phone AudioCodes 420HD. AudioCodes 420HD 2 pages. Ip phone with microsoft lync server
Also for AudioCodes 420HD: Quick Manual (4 pages), Quick Manual (4 pages), Quick Manual (2 pages)
Print Page
3. Cabling the Phone
Warning: Prior to connecting power, refer to the Compliancy and Regulatory
Information at https://www.audiocodes.com/library/technical-documents.
To cable the phone:
1.
Connect the short, straight end of the phone
cord to the handset and the longer straight end
of the cord to the handset jack on the phone.
2.
Connect the RJ-9 headset jack to a headset (optional).
3.
Connect the RJ-45 LAN port to your LAN
network (LAN port or LAN switch/router) with
a CAT 5 / 5e Ethernet cable.
4.
Connect the RJ-45 PC port to a computer
with a CAT 5 / 5e straight-through Ethernet cable.
5.
Connect the connector tip of the AC power adapter to the
phone's DC 12V power socket and connect the two-prong
AC adapter directly to the electrical wall outlet.
When the phone powers up, all the LEDs momentarily light up.
4. Attaching Stand to Phone
For instructions on assembling the stand, scan me or visit
https://www.youtube.com/watch?v=oGe9STB9lFE
Desktop mounting: Slide stand's outer rails (A) onto phone's outer notches (A).
Wall mounting: Slide stand's middle rails (B) onto phone's inner notches (B).
Desktop Mount
B
B
A
A
A
A
B
B
Wall Mount
Push this button
to detach stand
5. Basic Phone Operation
To make a call:
Pick up the handset, enter a phone number and then press the Dial softkey.
To call a contact, press the directory icon
directory, select the contact and then press the Dial softkey.
To answer a call:
Pick up the handset or press the Accept softkey.
To end a call:
On-hook the handset, or press the End softkey.
To mute a call:
Press the mute
key. To resume the conversation, press the mute key
again.
To redial a number:
Press the REDIAL key, select a dialed number, and then press the Dial
softkey.
To put a call on hold and make another call:
softkey, enter a phone number and press the Dial softkey. To return to the held call, press the
lower rim of the navigation key and then press the Resume softkey.
To transfer a call:
During a call, press the TRANSFER key, enter the phone number of the party
to whom to transfer the call, and then press the Dial softkey. After that party answers, press
the Trans softkey.
To perform a blind transfer, consult your IT manager.
8. Basic Phone Operation
softkey, access the Corporate or Personal
Press the Hold softkey and then the New Call