AudioCodes IPitimi LTRT-042-HTTPSFAX Quick Installation Manual

Browse online or download pdf Quick Installation Manual for Adapter AudioCodes IPitimi LTRT-042-HTTPSFAX. AudioCodes IPitimi LTRT-042-HTTPSFAX 2 pages.

AudioCodes IPitimi LTRT-042-HTTPSFAX Quick Installation Manual
1. Before Installing
Ensure that you have the following:
Pre-Programmed A udioCodes Fax
ATA by IPitimi
Note: use only HTTPSFAX labeled version
Included 12V power adapter (use only
one supplied for your country)
Local network (LAN) with DHCP and
Internet connection
Fax Machine or fax-capable multi
function printer (MFP)
IPITIMI FAX SOLUTION
The IPitimi Fax ATA can only be connected to our online serv ers using your
internet connection. Before proceeding, please ensure that your Fax ATA can
connect to the Internet from the location you wish to install it.
FAX NUMBER
Your device has been pre-programmed with a Fax number, if you are porting in your
fax number you will have a temporary number until it is replaced with your permanent
number. Number ports can take up to 3 weeks. You may choose to forward your old
number until porting is complete.
CHECK FAX MACHINE SETTINGS
Turn off your Fax Machine's success notifications. IPITIMI's
fax server will automatically send delivery notifications to your
Fax Machine or directly to you via email.
If you are going to be receiving faxes at your Fax Machine, set your
fax machine to auto-answer by default. Some Fax Machines do not
retain this setting after being turned on restarted.
2. Connecting
Connect the Ethernet Connector labeled "WAN" to your network.
1.
Power
Network
Connection
in WAN Port
Do NOT use LAN/PC
for network connection
2.
Connect the Telephone Port labeled PHONE 1 to the Fax Machine.
IPitimi d oes not currenlty support t h e PHONE 2 port a n d i t is
not enabled for use.
3.
Connect the Power. There is no ON/OFF (I/O) switch so the Fax
ATA turns on as soon as you connect the power. The POWER LED
is lit (green) and when initialization completes (~1 minute), the
STATUS LED changes from red to solid green. The unit might
automatically reboot within the first few minutes after downloading
updated settings from I Pitimi servers . This causes all 3 lights to
flash simultaneously. Wait for all 3 lights to again turn solid
green.
www. ipitimi .com /support
Getting Help: Go to
INITIALIZATION
Wait for all 3 status lights to turn solid green. Usually within a
minute, however could be more than 5 minutes if an automatic
upgrade is needed and can also vary depending on your Internet
speed.
nd
2
Fax Machine
(optional)
Fax Machine
for additional help.