Freecom NETWORK HARD DRIVE PRO User Manual - Page 6
Browse online or download pdf User Manual for Docking Station Freecom NETWORK HARD DRIVE PRO. Freecom NETWORK HARD DRIVE PRO 14 pages. Docking station / 2.5” & 3.5” sata & pata (ide) / usb 2.0
Also for Freecom NETWORK HARD DRIVE PRO: Specifications (2 pages), Specifications (2 pages), Specifications (2 pages), Datasheet (2 pages), Specifications (2 pages), Overview (3 pages)
Print Page
Freecom Blu-ray Rewriter Pro / Blu-ray Combo Pro
Chapter 1: Start Up
EN
1.1 Hardware installation
1
Since USB .0 is backwards compatible with USB 1.1, the Freecom Blu-ray
Rewriter Pro / Blu-ray Combo Pro can be connected to all USB ports. When
connected to a USB 1.1 port, however, the performance (data transfer rate) of
the Freecom Blu-ray Rewriter Pro / Blu-ray Combo Pro will be much lower
than when the drive is connected to a USB .0 port.
6
1. Connect the interface cable (USB or Firewire) to the
Freecom Blu-ray Rewriter Pro / Blu-ray Combo Pro.
2. Connect the cable of the power supply to the Freecom
Blu-ray Rewriter Pro / Blu-ray Combo Pro and the power
supply itself to the socket.
3. Connect the interface cable (USB or Firewire) to the
interface port (USB or Firewire) of your computer.
4. Switch on the Freecom Blu-ray Rewriter Pro / Blu-ray
Combo Pro.