AudioControl Rialto 600 Addendum - Page 2

Browse online or download pdf Addendum for Amplifier AudioControl Rialto 600. AudioControl Rialto 600 2 pages. High power audiophile amplifier with dac and preamp volume control
Also for AudioControl Rialto 600: User Manual (20 pages)

Print Page
AudioControl Rialto 600 Addendum
Rialto 600/Bijou 600 Addendum continued
3. Once the code sequence has been entered successfully, all 3 input LEDs will flash 3 times in a rapid fashion to confirm it has entered the IR
Learning mode. Once in this mode, the 3 input LEDs will remain lit until the amplifier is taken out of learning mode.
4. On the RTR-1 remote, press the desired function you wish to associate with the other remote. The Rialto/Bijou600 input LEDs will flash once
to indicate it is ready to learn the IR command from the other remote. For example, you could press "1" on the RTR-1 remote.
5. Press the button on the other remote that you want to associate with the function previously defined on the RTR-1. The LEDs will turn off,
indicating it has received the command from the new remote. For example, you could press a "1" on the other remote.
6. Press the button on the other remote again to confirm the command selection. The Rialto/Bijou600 will flash twice to indicate that the com-
mand is understood.
7. Repeat steps 4 to 6 for each button command you want the Rialto/Bijou600 to learn.
8. Once you are done, the amplifier will exit out of learning mode after 30 seconds of inactivity. Or, you can re-enter the number sequence
again: 3 1 2 1 3 2 3 to exit the learning mode.
Notes:
•
If the Rialto/Bijou600 receives a command that it does not understand, five times in a row, it will drop out of learning mode.
Important: If you have a multi-device remote, you must only use IR codes for devices that are not in your current system. Otherwise there
•
may be remote conflicts causing confusion, chaos and woe. For example, if you use the codes from your current TV, you will end up con-
trolling both the TV and the Rialto/Bijou600 and upsetting grandma all at the same time.
Pro Tip: If you plan on using a universal remote that can control multiple devices by switching the remote's "Mode, " then choose a mode on
•
the remote that you are not using. For instance, if there is an Aux mode, or VCR mode that you are not using, make that the mode for the
Rialto/Bijou 600. You can then select any random code from a manufacturer you do not have, and this will ensure no remote conflicts.
AudioControl
22410 70th Avenue West, Mountlake Terrace, WA 98043 USA,
Phone 425-775-8461, FAX 425-778-3166
2