AudioControl LC5i PRO Quick Start Manual - Page 6

Browse online or download pdf Quick Start Manual for Media Converter AudioControl LC5i PRO. AudioControl LC5i PRO 13 pages.

Print Page

Channel Outputs











7. Level – The Level dials allow you to adjust the signal level from your

source unit to match the inputs of your aftermarket amplifier.

8. Maximized Light (Max) – The Maximized Light can be used to help

achieve optimal output level and will let you know if you are getting close

to clipping the output of the LC5i PRO.

With the factory system set to its maximum undistorted volume, match

the output level of the LC5i PRO to the input maximum of your after

market amplifier. If the Maximized Light turns on, the LC5i PRO output is

distorting. Turn the output level down until the Maximized Light turns off.

IF THE MAXIMIZED LIGHT NEVER TURNS ON, don't panic. This just means

the output of the LC5i PRO is not clipping/distorting.

9. Channel Outputs (1-2-3) – These RCA outputs are connected to the

inputs of your amplifier or sound processor. When making connections,

designate red RCA plugs as right, and designate white, black, or gray plugs

as left.

10. Bass Level Control – Connect the ACR-1 to remotely control the output

level of the Channel 3 Outputs, ideally controlling the level of a subwoofer.

The ACR-1 is strictly an attenuator knob and will NEVER increase the

output level past where the Level dial is set.

11. Power – If you have connected all of your power wires correctly, this light

while shine bright red when your system turns on.

Quick Start Guide