Audiodesign PAMX1.24 Owner's Manual - Page 5

Browse online or download pdf Owner's Manual for Music Mixer Audiodesign PAMX1.24. Audiodesign PAMX1.24 6 pages.

Print Page
PREESSIONAL MIXERS
SEPCIFICATIONS
Section
Level and datas
MONO INPUT CHANNELS
Sensitivity from
0 to - 60 dB
Mic In
Impedance 2 Kohm
Sensitivity from
- 10 a + 4 dB
Line In
Impedance 10-20 Kohm (Bal-Unbal)
HIGH ±15 dB @ 12 KHz shelving
EQ
MID
±15 dB @ 2.5 KHz peaking
LOW ±15 dB @ 80 Hz shelving
STEREO INPUT CHANNELS
Sensitivity from
- 10 a + 4 dB
Line In
Impedance 20
Kohm
MASTER SECTION
MAIN OUT
Nominal Output level + 4 dBu
C. ROOM out
Nominal Output level + 4 dBu
FX SENDS1
Nominal Output level + 4 dBu
Nominal Output level 0 dBu
TAPE OUT
Nominal Output level - 10 dBv
Min Impedance
32 ohm
HEADPHONES
Max Output
(2x) 193 mW
MAIN SPECIFICATIONS
all outputs
+22 dBu
Max Level
Crosstalk
meas at 1 KHz > 82 dB
Hum and Noise
unweighted < -93 dBu
THD + Noise
a +4dB, 1kHz < 0,008 %
PAMX 1.24
Weight
.0 Kg
Dimensions (WxDxH)
cm
PAMX1
Serie
Connector
XLR-F Balanced
Jack Balanced
Jack
Unbalanced
Jack Balanced
Jack
Unbalanced
XLR / Jack Bal.
Jack
Unbal mono
Jack
Unbal mono
RCA
Jack Stereo
8
PROFESSIONAL MIXERS
STEREO CHANNELS
LINE IN 3/4
12.
L channel of a stereo source or a mono signal can be
MONO
L
connected to this 6,3 mm Jack input. Signal can be either
balanced or unbalanced*
Bal
13.
Only R channel of a stereo signal can be connected to this
or
6.3 mm input
Unbal
R
14.
This switch sets the channel input level (+ 4 / - 10 dB
attenuation)
15.
FX: This control adjusts signal level to send to FX
0
SENDS, controlled through general adjustment (19).This signal is
always "post" FADER
FX
16.
BAL: It adjusts the stereo scene by adjusting the signal
- ¥
+ 15
levels to send to right and left outputs.
+4
-10
17.
LEVEL: It adjusts the level of the channel signal.
16
BAL
* See connection scheme on page 7
Left
Right
0
LEVEL
17
- ¥
+ 15
Fig 2
PAMX1
Serie
5