Duplo DSF-2000 Installation Manual - Page 4

Browse online or download pdf Installation Manual for Printer Duplo DSF-2000. Duplo DSF-2000 11 pages. Sheet feeder

Print Page

1. POINTS TO NOTE IN INSTALLATION

Turn off the unit, then unplug its power cord from the AC outlet.

Make sure that the power supply voltage and frequency in your area match the power

requirements indicated on the main name plate of the unit.

Install the equipment in a place where the floor is strong enough to bear the mass of the unit,

which is as follows:

136 kg (299.56 lb)

Requirements for installation space are as follows:

Width × Depth = 1100 × 750 mm (43.31 × 29.53")

Install the equipment in a horizontal and stable position.

Do not install the equipment near heaters or other heat-emitting appliances.

Install and use the equipment in an environment:

– where the temperature range is between 5 and 35°C,

– where the humidity range is between 20 and 85%

RH (no dew condensation),

– which is not subject to direct sunlight,

– which is subject to little or no vibration,

This equipment shall be installed near the socket-outlet where the plug on the power supply

cord is easily accessible.

When you power other appliances from the same AC outlet, make sure that the combined

power consumption does not exceed the power supply capacity.

– where there are no harmful chemicals,

– which is reasonably free from dust,

– which is free from air-borne salt, and

– where the equipment will not be exposed to water.