Freedom Charge FDMC-1280 Installation Instructions
Browse online or download pdf Installation Instructions for Automobile Accessories Freedom Charge FDMC-1280. Freedom Charge FDMC-1280 3 pages. 2013 - current kia forte qi wireless charging kit
Print Page2013 - Current KIA Forte Qi Wireless Charging Kit
Please read thoroughly before starting installation and check that kit contents are complete.
Items Included in the Kit:
Qi Wireless Charging Module with
Camry Specific Mat
Power Harness with 3 amp Fuse
These Instructions with Template
Removable Consumer Product Label
*Note this product is designed to work with Qi compatible devices. Please confirm that
your device is Qi compatible before installation. Visit
compatibility guide.
Safety Precautions:
• Work in well ventilated area that is clear of obstructions.
• Secure vehicle with tire chucks in both front and rear of tires.
• Turn vehicle accessories OFF and ensure ignition key is in OFF position.
• Wear safety goggles and snug fitting clothes.
• Use tools only for their intended purpose and which are in good repair.
• Only perform this task if confidence, skill, and physical ability permit.
NOTE: We strive to provide accurate and up-to-date installation instructions.
For additional assistance please call Brandmotion Technical Assistance at (734) 619-1250 then dial 2.
1280Instructions1-22-15.doc
(Kit # FDMC-1280)
Tools & Supplies Needed:
IMPORTANT: Do not place smart keys
within 15cm of charging mat. Vehicle
may not detect key to start vehicle. Do
not place metal objects in tray while
charging.
Page 1 of 3
INSTALLATION
I NSTRUCTIONS
Plastic Trim Removal Tool
Phillips Screwdriver
Center Punch/Scribe Tool
Power Drill
1/2" Drill Bits
Wire Ties
Soldering Iron & Solder
Tape or Heat Shrink Electrical Tubing
www.brandmotion.com
(Recommended)
for phone