AEV Roof Rack Installation Manual - Page 5

Browse online or download pdf Installation Manual for Automobile Accessories AEV Roof Rack. AEV Roof Rack 13 pages.

Place channel nut within the crossbar as shown below and rotate 90 degrees. Place M8x15mm Flat Wahers on top of the

but do not tighten at this stage. Repeat this process for both ends of each crossbars.

Align crossbars so that the washer sits centred over the slot, you may need to tap the crossbar into position with a rubber

mallet. Once the crossbar is in position tighten bolt with allen key provided.

Install the Alloy Locking Tabs. Be aware of the orientation of the of the Single Alloy Tabs on the sides of the Platform.

M6x20mm Security Head Screw.

M6 Spring Washer.

M6 OD 16mm

Flat Washer.

Locking Alloy Tab

Single.

Locking Alloy Tab.

M8x20mm Dome Head Screw.

M8 Spring Washer.

M8 Flat Washer OD17.

M8 x15mm Flat Washer.

M8 Channel Nut.

Note the orientations of the Single Locking Alloy Tabs.

Washer aligned with slot.