Duplo 486P Operation Manual - Page 4

Browse online or download pdf Operation Manual for Paper Cutters Duplo 486P. Duplo 486P 18 pages.

Print Page

1. SAFETY RULES

The machine has many safety features which make it a safe to operate. Regardless of your

experience,

applied to your daily work habits. If you do not understand or are confused by certain

safety instructions presented in this manual, discuss them with your supervisor. Machine

setup, cleanup, and maintenance operation will vary. Therefore, it is essential all

employees to practice safe work habits. SAFE WORK HABITS PREVENT INJURIES. The

main rule to follow is to ALWAYS make sure the main drive is STOPPED and LOCKEDOUT

when performing setup, cleanup, adjustment and maintenance operations.

The safety precautions in this manual provide guidelines for the protection and for that of

fellow

workers.

1.1 Precautions

Before any maintenance is performed on the machine, switch off all sources of

electrical; do not operate the equipment when panels and safety covers are not in

place. Failure to observe this warning could result in personal injury.

1.2 Avoid Accidents

Most accidents are caused by the failure of some individual to follow simple and

fundamental safety rules and precautions. For this reason, most accidents can be

prevented by recognizing the real cause and doing something about it before the

accident occurs. With any machinery, a careful and trained operator is the best

insurance against an accident.

1.3 Safety Issues & General Safety Rules

1. Read and understand this manual

before attempting to operate or

service the machine.

2. Be familiar with the machine safety

rules and practices.

3. Warn others of an intended action that

may endanger them.

4. Perform lubrication and oiling of the

machine only when power is off.

5. Verify that all guards are installed

before operating the machine.

6. When working on electrical

safety instructions must be read carefully, completely understood, and

1. Do not attempt to operate or service the

machine without reading and understanding

this manual.

2. Do not remove the safety devices.

3. Do not clean or lubricate moving parts of a

machine that is running.

4. Do not unauthorized persons to operate the

machinery.

5. Do not place tools on a machine that is

running.

6. Do not reach into the machine to make

DO NOT