AudioEngine B2 Premium Quick Start Manual - Page 6
Browse online or download pdf Quick Start Manual for Speakers AudioEngine B2 Premium. AudioEngine B2 Premium 15 pages. Bluetooth speaker
Also for AudioEngine B2 Premium: Quick Start Manual (2 pages), Quick Start Manual (4 pages)
Print Page
Troubleshooting Tips
B2 is connected to AC power, but the power indicator on the rear
panel does not light up.
Check to make sure B2 is plugged into a functioning AC power
outlet and that the power switch on the rear panel is in the on
position.
My phone or other device will not pair with 82.
Verify that Bluetooth on your device is turned on and check that the
B2 Pair button on the rear panel is blinking (in Pair mode). Also
make sure your device is as close to B2 as possible.
B2 Pair light is solid, but
I
cannot connect my device.
Make sure no other devices are
connected.
If so, either disconnect
or turn off Bluetooth on the other device or press and hold the B2
Pair button until it
flashes,
then connect.
Unpair and re-pair your device to the
B2.
Cycle power by turning the B2 power switch off and back on
again.
B2 pair light is solid and my device is connected but no audio
output.
Check the volume level on
device.
Try unpairing and re-pairing your device to the
B2.
Turn the B2 power off and back on
again.
The volume output level from B2 seems low.
Check the volume levels on your device and music app.
Also check the volume level on the rear panel of your B2.