AudioEngine S8 Setup Manual - Page 4

Browse online or download pdf Setup Manual for Speakers AudioEngine S8. AudioEngine S8 10 pages. Premium powered subwoofer
Also for AudioEngine S8: Specification (2 pages), Setup Manual (13 pages)

AudioEngine S8 Setup Manual
Audioengine S8 Features
Super-compact size
8" custom down ring woofer
Wireless-ready!
Solid hand- nished, front-ported cabinet
Auto sleep power saving mode
Dual line-level inputs (RCA and mini-jack)
All cables included
Excellent performance for music, movies, and videogames
A perfect bass extension for Audioengine powered speakers!
Wireless Ready!
If you decide to place your AS8 away from your powered speakers or
receiver, check out the Audioengine W1 wireless adapters (shameless prod-
uct plug) or Apple's Airport Express for high-quality wireless options. The
AS8 has a built-in AC outlet on the rear panel that's perfect for powering
these wireless products.
Controls
Your AS8 Powered Subwoofer o ers simple yet versatile setting options.
After you've become familiar with what these settings do, don't hesitate to
experiment with them to nd the sound that works best with your system.
When you set up your subwoofer for the rst time, you will probably make
adjustments a few times before you hear what you like. Start with the
volume at 50% and keep in mind that as with subwoofer room placement,
there are really no right or wrong settings.
4
audioengine S8 setup guide
Following is an overview of the subwoofer controls and connections:
OUTPUT
INPUTS
AUX OUTLET
A
B
Unswitched
110–120VAC 60Hz 1A
220–240VAC 50Hz 0.5A
120W MAX
LFE IN
AS8
AC SELECT
FOR 110–120V: T3.15AL
FOR 220–240V: T2AL
Replace with
~AC
110–120V 2.5A
same rating
220–240V 1.6A 60Hz/50Hz
and type
1 Inputs
The RCA and 3.5mm mini-jack inputs are line-level audio inputs used for
connecting the output of your audio source (receiver, TV, iPod, computer,
etc.) into your AS8 subwoofer. Both inputs are active so no switching is
required if you wish to use inputs from 2 di erent audio sources plugged
in at the same time.
Note: If your receiver has a single (mono) subwoofer output, connect an RCA-
cable from this output to the RIGHT RCA input on the AS8 rear panel.
2 LFE In
If your preampli er or receiver has an LFE ("Low Frequency E ects") input
or single SUB output connect it to this "LFE In" input connector on the
subwoofer.
Note: Most receivers have a subwoofer preamp mono or stereo output, so
LFE will most-likely remain unconnected.
audioengine S8 setup guide
1
2
5