Dupont Enerfoam Installation Information - Page 2
Browse online or download pdf Installation Information for Foam machine Dupont Enerfoam. Dupont Enerfoam 4 pages. Professional foam sealant
Print PageINSTALLATION
Preparation
1. Read and follow the Safety and Conditions of Use instructions
below. Wear gloves, safety glasses or goggles and long sleeves.
Provide good ventilation and eliminate all sources of ignition.
2. Shake can vigorously for 1 minute before dispensing and
between uses.
3. Gun-applied version:
Invert can and screw foam dispensing gun assembly firmly
onto valve as shown in Figure 2. Screw until finger-tight; do
not overtighten (Figure 3). When changing cans using the foam
dispensing gun, tighten the flow control knob before removing
the empty can (Figure 4). Use DuPont
Cleaner to remove any residual foam from the attachment
area before attaching fresh can.
Straw-applied version:
Attach the nozzle by twisting it clockwise into the valve.
Figure 2
Figure 4
*Foam should be applied around the edges of the metal box. Do not apply within
the metal box.
Great Stuff Pro
Foam
™
™
Figure 3
Outdoor water faucet
Pipe penetration
Electrical wire penetration
Electrical outlet*
HVAC vent
Fireplace gas line
Sewer plumbing penetration
Wall-ceiling juncture
Attic hatch