Conquer Pro 530-TRNR5SPD Manual
Browse online or download pdf Manual for Fitness Equipment Conquer Pro 530-TRNR5SPD. Conquer Pro 530-TRNR5SPD 2 pages. Indoor bike trainer
Print Page
Trainer Setup for 26", 27" & 700C wheeled bikes w/
*Review and follow instructions prior to each use, and keep with trainer for future reference.
*Review and follow instructions prior to each use, and keep
*Use the product only as described in this manual.
only as described in this manual.
*Before each use, inspect the trainer and bicycle to ensure safety.
*Before each use, inspect the trainer and bicycle to ensure safety.
*Refer to the documentation for any questions. If you are unsure of use or have warranty inquiries,
*Refer to the documentation for any questions. If you are unsure of use or have warranty inquiries,
*Refer to the documentation for any questions. If you are unsure of use or have warranty inquiries,
please visit ConquerEquipment.com
please visit ConquerEquipment.com
fig 1
fig. 2
1. Remove all packaging unfold the
(numbered 1-5) to level trainer frame with floor, if necessary (fig. 6).
5) to level trainer frame with floor, if necessary (fig. 6).
2. Line up holes, then use screws (A) and
assembly (E) to bracket on frame
3. Use nut and bolt (D in fig. 1) to affix
4. Replace rear wheel skewer on bik
4. Replace rear wheel skewer on bike with included skewer (fig. 6). This is to make your bike fit
properly, for stability and for safety.
properly, for stability and for safety.
5. Install the bike's rear hub between the
5. Install the bike's rear hub between the lever clamps/couplings (fig. 6), and adjust wing nuts
within couplings. Do not over tighten.
Do not over tighten.
fig. 5
EMAIL:
, 27" & 700C wheeled bikes w/Quick Release
unfold the trainer's frame, and place on a level floor (fig. 5 below
se screws (A) and Allen wrench/screwdriver (B) pictured in fig.
(fig. 2).
) to affix magnetic resistance unit (fig. 3) to bracket/frame (fig. 4).
WEB: help.conquerequipment.com
Product name: Conquer Pro Indoor Bike
Conquer Pro Indoor Bike Trainer
Exercise Machine 5 Speed Magnetic Resistance
Exercise Machine 5 Speed Magnetic
SKU: 530-TRNR5SPD
EMAIL:
TEL: 855-349-4327
help.ConquerEquipment.com
.ConquerEquipment.com
Quick Release Wheels
trainer for future reference.
fig. 3
fig. 4
) to bracket/frame (fig. 4).
This is to make your bike fit in the trainer
, and adjust wing nuts to lock the rear hub
fig.6
below). Twist plastic feet
fig. 1 to attach resistance knob
Plastic foot
Plastic foot
Twist plastic feet on base
Twist plastic feet on base
(if necessary) to level unit
(if necessary) to level unit
on uneven floors.
on uneven floors.
TEL: 855-349-4327
TEL: