Daniamant Dan W3-2 Installation And Maintenance Instructions - Page 2

Browse online or download pdf Installation And Maintenance Instructions for Marine Lighting Daniamant Dan W3-2. Daniamant Dan W3-2 4 pages. Lifejacket light

Print Page

Installation

The Dan W3-2 is for use on all types of lifejackets.

The Dan W3-2 is supplied with a fixing clip. The clip is intended to be placed

behind a strip of lifejacket material or reflective tape; the light is secured by

pressing it into the clip.

p/n. 1950

p/n. 1952

Light and fixing clip (part no.1950 for grey standard clip, for 1" webbing + part no. 1952 Clips 2, for 2"

It is the responsibility of the lifejacket manufacturer to ensure that the light is

attached securely and is in the correct position on the lifejacket to provide

maximum visibility when the wearer is in the water.

Operation

The DAN W3-2 is switched on automatically when the sensor is immersed in

water and can be switched off by pressing the on/off button.

The light can also be activated and deactivated manually by pressing the on/off

button.

The sensor on the cable can be tested by a metal clip.

Figure depicts the Sensor Switch and the Manual ON/OFF Button

webbing) separated to show material path

Sensor

Switch

ON/OFF

Button