Audiolab 8000M Specification Sheet
Browse online or download pdf Specification Sheet for Amplifier Audiolab 8000M. Audiolab 8000M 1 pages. Audiolab power amplifier specification sheet
Also for Audiolab 8000M: User Instructions (6 pages), User Instructions (6 pages), User Instructions (6 pages)
Print Page
International Audio Group
IAG house,
Sovereign Court,
Ermine Business Park
Huntingdon, PE29 6XU
8 0 0 0 M
Power Amplifier
S p e c i f i c a t i o n
The 8000M provides a genuine 125W
power into an 8Ohm loudspeaker load,
and features twin output terminals for
bi-wiring.
It has parallel phono connectors making it
easy to connect several pairs of 8000Ms
to any pre-amplifier. This allows you to
daisy-chain units to further improve
headroom
in
bi-amped
tri-amped systems.
Simple styling belies the power and speed
of response available from this compact
amplifier
and
even
Rated output power
Typical output power
Input for full rated power
Input impedance
Gain
Signal to noise
Frequency response (-3 dB)
Frequency response (±0.3dB)
Total harmonic distortion + noise
Dimensions (WxHxD - mm)
125 W per channel into rated load impedance (8 ), 200 W into 4
145 W per channel into rated load impedance (8 ), 240 W into 4
1.13 V rms
47 k
nominal
29.0 dB at 1 kHz
Greater than 96 dB (relative to 0 dBW)
0.1 Hz - 75 kHz
20 Hz - 20 kHz
Less than 0.05%
445 x 74 x 337
a u d i o l a b