Audiolab M-PWR User Instructions - Page 3
Browse online or download pdf User Instructions for Amplifier Audiolab M-PWR. Audiolab M-PWR 13 pages.
Also for Audiolab M-PWR: User Instruction (12 pages)
Print Page
2: Getting Started
Thank you for purchasing the Audiolab M-PWR. We, at Audiolab, have spent
hundreds of hours perfecting the design of this unit so that you can enjoy hi-fi
music in your home.
M-PWR is primarily designed to match with Audiolab M-DAC or Q-DAC, but
is equally suitable for partnering with Audiolab 8200 CDQ using its in-built
preamplifier.
Of course M-PWR can also be used in any hi-fi system where the source unit
includes volume control. For example it can be connected to a pre-amplifier or
control unit fed from a variety of sources.
By providing both Balanced and line inputs, M-PWR is an extremely versatile
stereo power amplifier. If you already own the Audiolab M-DAC/Q-DAC or
8200 CDQ you will find that the Balanced connections bring a new level of
fidelity and detail to your listening.
Whatever source you choose, M-PWR will drive your loudspeakers with a
unique combination of power and finesse that we hope will bring you many
hours of listening pleasure.
Signal Inputs:
•
RCA analog input
•
XLR Balance analog input
Signal Output:
•
Loudspeaker output
Operating Features:
•
Ultra low noise gain circuit
Audiolab M-PWR english manual.in3
3
•
Optimized for low distortion
•
Output short protection
•
High temperature protection
Unpacking
Unpack the product fully. The carton should contain:
•
The Audiolab M-PWR
•
Power cord suitable for your region
•
Instruction manual
•
Warranty Card
If an item is missing or damaged, report this to your dealer as soon as possible.
Retain the packing for safe transport of your unit. If you dispose of the packing,
please do so with regard to any recycling regulations in your area.
Placement
The unit is designed to run warm during normal operation but ensure you do
not block any ventilation openings.
Place the unit on a sturdy shelf or table. If you use equipment racks, ensure the
unit has adequate ventilation and is on its own shelf.
Ensure your mains voltage corresponds to the rating plate on the rear of the
product's power supply. If in doubt, consult your dealer. If you move to an area
with a different mains voltage, seek advice from an Audiolab appointed dealer
or a competent service technician.
Page 2
2013-3-11
12:29:03