Brainwavz 3M VHB Tape Mounting Manual

Browse online or download pdf Mounting Manual for Racks & Stands Brainwavz 3M VHB Tape. Brainwavz 3M VHB Tape 2 pages.

Print Page

INSTALLATION GUIDE

VHB TAPE & SCREWS

3M™ VHB™ Tape Mounting Guide

Thoroughly clean and prepare surface

before installation(A). Mark the desired

location for your Brainwavz product (B).

Apply pressure by pushing the product

the surface (B). This will help to develop high-strength

adhesion.

To ensure a more secure bond has been achieved, do not

Peel the red backing off the

use your new hanger for at least 24 hours after installation

3M™ VHB™ tape.

or the hanger may fall down.

minutes is 50%, 24 hours is 90% and 72 hours is 100%.

minutes is 50%, 24 hours is 90% and 72 hours is 100%

Safety Guidelines

Screws are highly recommended when mounting heavy or fragile items.

When mounting onto hollow/cavity surfaces we recommend using 3M™ VHB™

tape and screws for extra security.

Before screwing the product into place ensure your chosen surface is solid, dry and

secure.

Take care when removing 3M™ VHB™ tape from any surface as it may cause

damage.

Always use the screw caps provided - DO NOT over-tighten screws.

In case of any problems please contact us by email:

(A)

hard onto

Bond strength at 20

For illustration only - your product may differ from one shown

When your product is in place and safely

hung, use the small sticky dots provided to

cover over the unused screw holes.