Brainworx Fuchs Overdrive Supreme Plugin Manual - Page 5

Browse online or download pdf Plugin Manual for Recording Equipment Brainworx Fuchs Overdrive Supreme. Brainworx Fuchs Overdrive Supreme 10 pages.

Print Page

T h e A m p S e c t i o n

MASTER:

INPUT:

Continuous knob, 1 to 10. The overdrive stage, as mentioned above, is fed from the clean preamplifier. Two controls affect overdrive: You can increase this internal setting

if desired. The Overdrive Input (Front panel) sets the amount of distortion content, by adjusting the drive between the two overdrive stages. Overdrive Output acts to balance the

volume of the Overdrive channel with the clean channel. There are no "correct" Overdrive settings; finding the desired tone setting depends on the guitars/pickups used, as well

as your own personal tastes.

OUTPUT:

Continuous knob, 1 to 10. This control adjusts the volume for the overdrive section.

OVERDRIVE MODE (PULL-OD):

On/off switch. Engages overdrive mode

MASTER:

Continuous knob, 1 to 10. The Master Volume adjusts the overall volume of the amp and works in conjunction with the GAIN, INPUT & OUTPUT controls for overall volume

of the amplifier.

ACCENT:

Continuous knob, 1 to 10. The accent control works within the power amp section, reducing negative feedback at higher frequencies. It adds an edge to the overall amplifier

tone. It's excellent for cutting through in a band or a recording mix. It can also allow greater ability to selectively make notes feedback and "sing."

Fuchs Overdrive Supreme