3Ware 3WARE 9650SE User Manual - Page 11

Browse online or download pdf User Manual for Software 3Ware 3WARE 9650SE. 3Ware 3WARE 9650SE 11 pages. Remote battery board
Also for 3Ware 3WARE 9650SE: User Manual Addendum (1 pages), Specification (7 pages), Installation Manual (4 pages)

Updating the Firmware

Uninstalling 3ware Software Under
OpenSolaris
www.3ware.com
Firmware updates to the 3ware RAID controller can be done from CLI or by
using the bootable CD image.
For details on updating the firmware using the CLI, see the discussion of the
command /cx update in the 3ware SAS/SATA RAID Controller CLI
Guide.
For details on using the bootable CD image, see "Updating the Firmware
Through DOS Using the 3ware Bootable CD," in Chapter 10 of the 3ware
SAS/SATA RAID Software User Guide.
Electronic versions of these documents are available at
http://www.3ware.com/support/userdocs.asp.
Note:
After updating the firmware, a complete system shutdown and reboot is
required.
The following steps describe how to uninstall software on OpenSolaris from
the command line. If you do not use the -console option, the installer will
assume you want GUI mode. You must be root to run the uninstaller.
To uninstall software under OpenSolaris
1
Navigate to the directory where you installed the software. The default
directory is /opt/AMCC.
2
Change to the subdirectory "_uninst".
3
To uninstall in text mode, type:
./uninstall.bin -console
To uninstall in graphical mode, type:
and press
./uninstall.bin
Follow the prompts to remove the installed components.
Updating the Firmware
and press
Enter
.
Enter.
9