Casio MT-640 Operation Manual - Page 14

Browse online or download pdf Operation Manual for Musical Instrument Casio MT-640. Casio MT-640 16 pages. Electronic musical instrument

Print Page
11. MIDI
11-9 Using the MT-640 as a MIDI percussion sound source
When either of the "Percussion" tones are selected as a MIDI timbre, you can
use the MT-640 as a MIDI percussion sound source. (Refer to page 9-10 for details
on percussion sound key assignments.)
When channel 4 is used as a fourth voice instead of MIDI clock message trans-
mission, try selecting one of the percussion tones for this channel. In this way,
you can create original rhythm patterns using a sequencer.
* When you select Percussion 71 for a MIDI timbre, the reception of the note number 85 through
90 causes "opened triangle" to sound.
* When you select Percussion 2 for a MIDI timbre, the reception of the note number 85 through
90 causes "typewriter bell" to sound.
11-10 Using Drum Pads in the MIDI mode
;
When the Chord/MID!
selector is set to "MIDI", percussion sounds assigned
to the channel select pads (Quijada, Voice, Wind Chime, Orchestra Hit) do not
sound. Other percussion pads operate normally, however.
e Percussion Pad MIDI Transmission
When the MT-640 is set to transmit, the percussion pads trigger transmis-
sion of the following MIDI note numbers.
HI TOM:
96
CRASH
SYMBAL:
93
MID TOM:
95
HI AGOGO:
92
;
LOW TOM:
94
LOW AGOGO:
91
.
e Percussion Pad MID! Reception
When the MT-640 is set to receive, pad sounds are triggered upon reception
of the note numbers listed above.
11-11 Additional preset tones in the MIDI mode
The following tones can be utilized when receiving MIDI program numbers 20
through 29.
Program No.
Tones
Program No.
Tones
20
Honky-tonk piano
25
Synth celesta
21
Marimba
26
Synth clavi
22
Oboe
27
Metallic sound
23
Synth reed
28
Fantasy
24
Harp
29
Miracle
down.
'ag
down.
eSy
, rl TED adi A
Occasional interference
FP
ee
Pea oes
down.
cord.
a ye
ry sels M204 Re
esterrpgest
ctbsied
WE
TOT
O ¢
medy" Ore Od
. Turn up main
volume.
2. Disconnect head-
phones.
3. Turn the power
switch off and then
on again.
Change setting of
Chord/MIDI
selector.
Turn up main and
accompaniment volume.
1. Turn up main
volume,
—
cord.