AUDIOLINE TEL2 User Manual - Page 3

Browse online or download pdf User Manual for Telephone AUDIOLINE TEL2. AUDIOLINE TEL2 8 pages. Slim line phone

Print Page

CONNECTING

Connect the line cord to the wall socket.

Lift the handset and check for dial tone.

WALL MOUNTING

The Audioline TEL2 can be wall mounted directly onto the standard wall plate or to the

wall using the template (provided) and suitable screws (not provided).

When wall mounting you will need to rotate the handset retaining clip (located on the

cradle) 180 degrees to ensure the handset remains on the cradle.

TO CALL

# Lift the handset and wait for dial tone.

# Dial the phone number.

# Finish the call by replacing the handset or pressing the hook switch (item 2 on

diagram).

If the number you called is busy or if you want to call the previous number again, just

press the

[REDIAL]

NOTE: Only manually dialled numbers can be redialled in this way. Direct memories can not be

redialled by this method.

With the Volume Controls (item 6 on diagram)

or decrease the earpiece volume.

NOTE: For use in Australia the volume adjustment should not be set higher than step 2. Settings

3 to 6 may cause the equipment to be outside the Australian requirements.

For use in New Zealand the volume adjustment should not be set higher than step 4. Setting 5 and

6 may cause the equipment to be outside the New Zealand requirements.

If you wish to converse with a third party privately simply press the

(item 8 on the diagram). The red indicator will flash when the mute function is active.

Press the

[STORE/MUTE]

button (item 7 on the diagram).

button again to continue the conversation.

[VOL •]

[VOL –]

and

you can increase

button

[STORE/MUTE]