Danish Design IQ16Q760 Quick Start Manual

Browse online or download pdf Quick Start Manual for Watch Danish Design IQ16Q760. Danish Design IQ16Q760 2 pages.

Print Page

IQ16Q760

Setting the watch to a different time zone:

By pressing button "A" (<3 seconds) the current time zone is displayed. By pressing "A" again

for a shorter period, this time zone can be altered to the one you are currently in. The hands will

then automatically turn to this time zone.

Date and signal strength:

Normally the date can be read in the display. By pressing button "B" ( <3 sec) a seconds

counter will appear, a symbol for an RC tower and a number. The number represents the

number of days since the last signal was received. If it reads "0" , the signal has been received

in the last 24 hours.

Setting the hands:

Press button "B" for more then 3 seconds. The hands should turn to the 12 O‟clock position.

When they don‟t, the hands should be calibrated manually. To do this, press both buttons at the

same time for a few seconds. The letter "H" will appear, indicating that the hour- and minute

hand can be altered. Continue pressing button "A" untill the hour and minute hand have reached

the 12 O‟clock position.

If these hands have been set, press button "B" once. An "S" should appear in the display., which

indicates the seconds hand can be altered. Keep pressing button "A" untill the seconds hand

reaches the 12 O „clock position. If all 3 hands have reached the 12 O‟clock position, press

button "B" once ( > 3 seconds) to return to the normal time. The watch should automatically set

itself to the correct time within a few minutes.

General information

The range of the watch is a radius of approximately 1000 miles from Frankfurt.