AUDIOLINE DECT8048-1 Operating Instructions Manual - Page 5

Browse online or download pdf Operating Instructions Manual for Handsets AUDIOLINE DECT8048-1. AUDIOLINE DECT8048-1 8 pages. Additional dect/gap handset

Print Page

These supplemental operating instructions describe how install additional handsets with the

AUDIOLINE DECT8048 and other DECT/GAP cordless telephone systems. However, all

functions supported by this handset are available only in conjunction with the AUDIOLINE

DECT8048.

Note: Please refer to the free download in our Website

complete operating instructions including the declaration of conformity and notes on

safety applicable to this extension set.

SCOPE OF SUPPLY

The following parts are enclosed in the package:

DECT8048 Handset

Charger

Two standard 1.2-volt AAA rechargeable batteries

FITTING STANDARD BATTERIES

To fit the standard rechargeable batteries supplied into the handset, press on the upper

edge of the battery compartment and slide it downwards. Now insert the batteries taking

care to ensure that the polarity is correct. Close the battery compartment cover.

Important note: Place the handset in the base station with the display to the front for at

least 16 hours. The telephone may malfunction if the batteries are not properly charged.

The charging light on the base station will come on.

CONNECTING THE CHARGER

Set up the charger within reach of a electricity supply socket. Insert the red connector on the

lead from the transformer plug in the socket on the backside of the charger and insert the

transformer plug in a 230V supply socket installed in accordance with regulations. For

safety reasons, use only the transformer plug supplied. Press the cable into the cable

channel leading to the rear of the charger.

DECT8048-1

Operating instructions

Power supply

www.audioline.de

for