AudioLink PLS-232C Manual - Page 3

Browse online or download pdf Manual for Hearing Aid AudioLink PLS-232C. AudioLink PLS-232C 7 pages. Personal listening system

Print Page

4-Adjust the television volume to a level comfortable for other listeners in the room.

Note: Typical "Audio out" jacks are affected by the television volume setting. Muting

the television will also mute the sound to the AudioLink

II system. Setting the volume

at too low a setting may result in insufficient signal reaching the AudioLink

II system.

The effect of this low signal may be low volume in the receiver or no volume at all.

Step 3: Mic-Line selector.

The Mic –Line selector switch defines what type of audio source is being used with the

transmitter. When using the provided audio cable select the Line option. If a microphone is

used, select the Mic selection. Note: If the incorrect setting is used, the user may

experience very low volume or no volume at all.

Step 5: Turning the transmitter on/off.

The transmitter has a power on/off switch located on the top right side (See figure 2). Press the

switch once and the transmitter will power on and the red LED will illuminate. Press it again to

turn the transmitter off.