Danish Interpretation Systems DCS 6000 User Manual - Page 10

Browse online or download pdf User Manual for Transmitter Danish Interpretation Systems DCS 6000. Danish Interpretation Systems DCS 6000 18 pages. Digital conference system
Also for Danish Interpretation Systems DCS 6000: User Manual (19 pages), User Manual (10 pages), User Manual (14 pages), User Manual (14 pages), User Manual (13 pages), User Manual (14 pages)

Print Page

Danish Interpretation Systems

If the B-select buttons is pressed the last two menu

items are shown:

-Backlight

-AB with mic on

A menu is selected by pressing the button to the left

of the menu (a-d). Then the display shows the next

level of menus or selections.

"A" language selection

Pressing the (d) button selects the A-language set-

up menu:

A-language:

¦ 7 Norwegian

Desk number:

Press c-button for selecting the A-language for the

Interpreter Set. A black dot is indicating the

selection. Then use Relay-select up/down to scroll

through the available languages. The Desk number

will automatically change to the next available desk

for the selected language. To save the selection,

press OK (B-button).

If the desk number is set to an already occupied

desk number the set will take over the configuration

from the set on that desk and the other set will be

loose the configuration.

"B" language selection

When B-language is selected by pressing the c-

button, the following menu will appear.

B-language:

¦ 7 Norwegian

B-mode:

One

Press button (c) for selecting the B-language for the

Interpreter Set. A black dot is indicating the

selection. Use Relay-select up/down to scroll

through the available languages.

Press button (a) for selecting the B-mode for the

Interpreter Set. The B-mode selection has the

following choices:

Cancel

Manual 01 18 04445, Printed in Denmark, 02/2003 CHN

All

The interpreter can select any B-language

himself.

One

Only the B-language chosen at the B-

language selection can be used during operation.

None

During operation no B-language can be

used (the B-button has no function except for b-B).

To save the selection, press OK (B-button).

Ver. and serial no.

This is an information menu showing the version,

software serial number and the address assigned to

the unit by the CU 6010 Central Unit.

IS6132 rev. D

SW ver.:

Serial #: 055.004.255

Address:

Press OK to return to the Set-up menu

Communication status

This is an information menu showing the

communication status of the unit.

Rx Errors:

Tx Retries:

Tx dropped:

Press Reset to reset the number of Errors etc.

counted. After start up, some errors can be seen, but

if the numbers of errors are constantly increasing,

the cabling or a unit is defective. The fault could

also be a LAN connector, which is not properly

inserted. Please note the "click" from the lock,

when inserting the connector.

Press OK to return to the Set-up menu.

If the communication during start up is failing in a

way, that the Interpreter Unit will not work, this

screen will be shown instead of normal welcoming

screen.

User Manual

000.0043 OK

215

Reset