Audiomatica 4 User Manual - Page 13

Browse online or download pdf User Manual for Amplifier Audiomatica 4. Audiomatica 4 13 pages. Amplifier & switch box

Print Page

13 - INTERNAL SETTINGS AND TROUBLESHOOTING

If you want to make one of the possible internal settings disconnect the unit from

the mains power and then carefully open the unit; locate SW2 from the figure below

and make the appropriate selection. It is possible, using the dip switch SW2, to select

a phantom power supply of 8.2V on each input separately (to power an Audiomatica

MIC-01 or MIC-02 microphone). When a switch is ON the phantom power is present

at that input.

The unit is factory set with the phantom power enabled on all input.

The QCBox Model 4 is also equipped with one 2A 250VAC internal mains fuse.

FU1 - 2A 250VAC FUSE

SW2 - PHANTOM SUPPLY