3xLogic VISIX VX-VSS-20 Quick Start Manual - Page 11
Browse online or download pdf Quick Start Manual for Security Camera 3xLogic VISIX VX-VSS-20. 3xLogic VISIX VX-VSS-20 14 pages. Stereoscopic people counting camera
Print Page
CONFIGURATION FOR MULTIPLE CAMERAS
1. Repeat the configuration process for each camera following the steps outlined in the previous section.
2. Move each camera's detection line and connect the ends of adjacent lines. Some objects could be placed
on the image border for reference. See picture below:
4.3
Saving the Camera to VIGIL Server
After configuring the camera's people counting rule and testing its accuracy, the camera can be saved to VIGIL
Server. To save the camera to VIGIL Server:
1. Return to the 3xLOGIC Camera (VISIX IP) Setup Utility interface (pictured in Section 4.1).
2. Click on Detect Online Devices/ Change IP Address to proceed to the Online Devices window.
3. Select the VX-VSS-20 configured in the previous section from the list of detected devices. Click Save to
VIGIL. .
4. You will be prompted to choose the camera channel, video codec and recording FPS values Select the
desired settings and camera channel and click OK to save the camera to VIGIL Server.
12000 Pecos Street, Suite 290, Westminster, CO 80234 | www.3xlogic.com | (877) 3XLOGIC
VISIX Stereoscopic People Counting Camera | Quick Start Guide | VX-VSS-20
Figure 4-5 Configuration of each detection line
Figure 4-6 Saving Camera Settings to VIGIL
11