Danmini YA-300-GSM User Manual - Page 7

Browse online or download pdf User Manual for Security System Danmini YA-300-GSM. Danmini YA-300-GSM 16 pages. Security gsm alarm system

Print Page

Message Receiving Phone

Number

Delete Message

Defence zone Programming

Stay in defence zone

Remote Arm

Remote Disarm

Appliance Open

Appliance Close



Change Password

In the status of remote control programming, directly enter the address code [30]/[31] by phone keys, enter the

4-digit new password, at last add [#] to confirm. The main unit emits a long "beep" tone, indicating the operations

are successful.

Operation password:

Programming password:

Illustration: "X" indicates the new password; for example, change the factory default (8888) of programming

password into the new password: 0000.

SMS Command: 8888310000#

Operation Password: after dialing the SIM card number by mobile phone (or fixed phone), if you enter the

operation password (factory default: 1234), you can only perform the operations including arm, disarm and

monitoring by remote control.

Programming Password: after dialing the SIM card number by mobile phone (or fixed phone), if you enter

programming password (factory default: 8888), you can only perform the following settings including voice call,

SMS receiving phone number and functions.

Cautions: the operation password and the programming password can not be set to the same number.



Phone Setting

Voice Call

When it is set to alert through voice call, the main unit can send warning voice message to 6 phone numbers,

(for example: defence zone 5, balcony alarm, this is......) .

In the status of remote control programming, enter the address code [51]~[56], enter the phone (fixed phone)

number and then enter [#] to confirm. [51]~[56] represent the address codes corresponding to voice

[Program password] + [57] + [#]

[60]+[01~08]+[1~4]+[1~8]+[0/1]+[#]

[Operation password] + [1] + [#]

[Operation password] + [2] + [#]

[Operation password] +5# or

[Operation password] +6# or

X X X X

0 0

[Program password] + [57] +

[phone number] + [#]

[Program password] +

[61] + [01~08] + [0/1] + [#]

[Operation password] +7#

[Operation password] +8#

[57]~[59] 3 groups

Factory default: 1/1/0

Factory default: 0