Audiophonics DA-S250NC User Manual - Page 12

Browse online or download pdf User Manual for Amplifier Audiophonics DA-S250NC. Audiophonics DA-S250NC 14 pages.
Also for Audiophonics DA-S250NC: User Manual (14 pages)

Audiophonics DA-S250NC User Manual
15
16
18
19
20
22
23
24
26

Operation of the device

Switching on the device
First, connect the amplifier's power supply connector (13) to a power outlet using the supplied power cable. Press the power button (14). The LED on the ON/OFF
button (1) will light up red. Press the ON/OFF button (1) on the unit or the ON/OFF button (15) on the remote control. The amplifier is now switched on.
Volume control
The DA-250NC's volume attenuation can be adjusted over a range of -60dB to 0dB in 0.5dB steps. To increase the volume, turn the volume knob (5) clockwise or
press the Volume + button (25) on the remote control. To decrease the volume, turn the volume knob (5) counterclockwise or press the Volume - button (24) on the
remote control. The display (4) shows the current volume level.
Enable / Disable the mute mode
The mute mode allows you to instantly mute the audio output. To enable the mute mode, press the Mute button (26) on the remote control. « MUTE » appears on
the display (4). To disable the mute mode, press the Mute button (26) on the remote control again, or change the volume level using the volume control (5)�
Input selection
To select an input, press the Input button on the device (2) or the Input button on the remote control (16). The inputs change in the following cycle : USB > Coaxial
> Optical > Bluetooth > USB. The display (4) shows the active input.
Remote control
17
INPUT
SELECT
21
25
VOL-
VOL+
MUTE
#
Description
15
ON/OFF button
16
Input selection button
17
Menu button
18
Up navigation
19
Validation button
20
NA
21
NA
22
Bottom navigation
23
NA
24
Volume -
25
Volume +
26
Mute button
11
EN