audiophony COMBO 130 User Manual - Page 5

Browse online or download pdf User Manual for Amplifier audiophony COMBO 130. audiophony COMBO 130 10 pages. Mixer/amplifier with tuner and usb player for 100v line

Print Page

AUDIOPHONY PUBLIC ADDRESS

4.4 - Rear panel

[1] Fuse

If need to change the fuse, please replace it by a model

with the exact same characteristics.

[2] Power cord

Connect this cable to a standard electrical outlet (16 A -

230 V).

[3] Mic 2 and 3 inputs

These unbalanced Jack 6.35 inputs allow you to use

dynamic microphones. The volume can be controlled via

the front panel.

[4] Aux 1 and 2 inputs

These RCA unbalanced stereo inputs allow you to

connect line-level -10 dB sources.

[5] Line-level output

This RCA unbalanced output allows you to connect sound

diffusion or recording systems. The output level is -10 dB.

[6] Loudspeakers output terminal

Connect here your sound system, depending on its type.

The black terminal represents the com.

The red terminal must be used according to your sound

system:

- 4 to 16 Ohms for a speaker set with a total impedance

included between 4 and 16 Ohms

- 70 V for a PA system of 70V (max 130 W)

- 110 V for a PA system of 70V (max 130 W)

Warning: Dangerous output voltage (100V ).

Please only use cables compliant with the

current laws and safety regulations.

[7] Mute button

Allows you to configure the mute level. The max value is

-30 dB.

[8] AM antenna

Connect your AM antenna here. The system cannot detect

any signal without antenna.

[9] FM antenna

Connect your FM antenna here. The system cannot detect

any signal without antenna.

ENGLISH