audiophony PREZONE642 User Manual - Page 6

Browse online or download pdf User Manual for Amplifier audiophony PREZONE642. audiophony PREZONE642 13 pages. Multi-zone, mount-rackable mixer/preamplifier

Print Page
English
7
PFL Buttons
Allow you to send the pre-fade signal (before channels
alterations) to the monitoring area.
8
Output equalization
Allows you to adjust some output signal frequencies.
- HIGH (High Frequency control): Allows you to adjust
the output signal trebles from -15 to +15 dB at 12.5kHz.
Turn this knob clockwise to increase trebles, while
turning it counterclockwise decreases them.
The middle position does not modify trebles.
- LOW (low frequency control): Allows you to adjust the
output signal basses from -15 to +15 dB at 12.5kHz.
Turn this knob clockwise to increase trebles, while
turning it counterclockwise decreases them.
The middle position does not modify basses.
9
SUB Control knob
Allows you to adjust the SUB1 and SUB2 output levels.
Page 6
PREZONE642 - Multi-zone, mount-rackable mixer/preamplifier
10
ZONE 1 and ZONE 2 faders
Allows you to adjust ZONE 1 and ZONE 2 signals output
volume.
11
CLIP LEDs
Indicate an excessive signal level on the corresponding
channel.
We strongly recommend not to exceed brief flashes of
these indicators in order to prevent sound distortions.
12
LED VU meter
7-LED VU meter indicating the signal level for each
channel.
Please make sure the signal remains between 0 and +4
dB to ensure optimal sound quality.
13
Z 1 and Z 2 swiches
Allow you to monitor ZONE 1 and/or ZONE 2.
14
LEVEL Control knob
Allows you to adjust monitoring headphones signal
output volume.
15
Jack 6.35 input
Connect here your monitoring headphones.