audiophony WALLAMP-USB User Manual - Page 5
Browse online or download pdf User Manual for Amplifier audiophony WALLAMP-USB. audiophony WALLAMP-USB 8 pages. Full set with recessed amplifier and 2 x 30w + speakers
Print PageAUDIOPHONY PUBLIC ADDRESS
Rear panel
Port USB
Infrared remote control
1 - Power input:
Connect here the cables coming from the supplied power unit.
Please check polarities.
2 - Output terminals:
Connect here the speaker cables.
In order to ensure an optimal quality, please use 2 x 1,5 mm² cables without
exceeding a maximum length of 10m.
Note:
-Please check polarities.
-Do not ever connect two terminals together, as their masses are not
common.
-Please make sure not to drop below an impedance of 4 Ohms
3 - A and B input terminals:
Connect a stereo shielded cable here.
These terminals must receive a line-level signal (CD, Tuner, Radio).
In order to ensure an optimal quality, please do not exceed a maximum
length of 10m.
A or B input selection can be accessed at the front, via the source button.
Front jack inputs override these ones.
1 - USB port:
The USB port allows you to play mp3, WMA, WAV files from a USB key.
Controls are accessible via the remote control.
This port also allows you to charge your phone or tablet by using the
supplied charge cable.
Selecting an A or B source via the source button wil deactivate file playback
from the USB port, which will still be able to charge your device at +5VDC.
1 - Power button
2 - Mute button
3 - and + volume buttons
4 - Skip track. Allows you to skip to the next/previous track of your USB key
5 - Play/Pause. Allows you to play or pause the current song
6 - Input source selection: A or B or USB reader
7 - Equalization modes:
Speech : for voices
Hall : for large spaces
Music : to listen to modern music
ENGLISH
Page 5