audiophony MOJOcurveXL DSP User Manual - Page 15

Browse online or download pdf User Manual for Speaker System audiophony MOJOcurveXL DSP. audiophony MOJOcurveXL DSP 20 pages. Active curve array system with mixer

Print Page
audiophony MOJOcurveXL DSP User Manual
MOJOcurveXL - Active curve array system with mixer, BT and DSP
4 - DSP
4.1 - Level bargraph :
The display show the of each 4 channels and of the Master.
This allow you to visualize the signal and adjust the input level. There you can see also if the Limiter is activated.
4.2 - Menus :
Caution, when the system is operating at full power, too high an equalization setting can harm the amplifier.
Limiter threshold
Channel level
High adjustement +/- 12 dB at 12 kHz
Mid adjustement +/- 12 dB on the frequency choosed below
Setting of the Mid frequency adjustement
From 70Hz to 12KHz
Low adjustment +/- 12 dB at 70 Hz
MUSIC : This equalizer setting is almost flat
VOICE : This mode allows to get more clear voices
DJ : This preset makes the bass and high more punchy.
OFF : No cutting
Low cut frequencies choice : 80 / 100 / 120 / 150 Hz
OFF : No delay
Adjustment of the delay from 0 to 100 meters
OFF : The Bluetooth
receiver is OFF
®
ON : Switch ON the Bluetooth
When the Bluetooth® receiver is active, search for the device named
MOJOcurveXL on your Bluetooth® device to pair it.
TWS : Allow to connect another MOJOcurveXL in stereo by Bluetooth
Master level and limiter
receiver and send to channel 4/5
®
English
indicator
®
Page 15