audiophony COMPACT500 User Manual - Page 5

Browse online or download pdf User Manual for Subwoofer audiophony COMPACT500. audiophony COMPACT500 12 pages. Amplified system with subwoofer and satellites-500w

Print Page
COMPACT500 - Amplified system with subwoofer and satellites -500W
A- Rear view
2 3
1
3.2 - More details about the command panel of the subwoofer:
11
12
13
14
1
2
5- Balanced stereo link
Allows you to daisy-chain several COMPACT500.
Please use a stereo Jack / Jack 6.35 cable.
6- Satellites output configuration
Left selector: Stereo mode if both outputs are active and the two satellites separated to be used as a 2.1 sound
system.
Right selector: Mono mode, the left output only is active and the two satellites are linked together to focus their power
on one single side. In this mode, a second COMPACT500 sound system can be connected to the output No. 5 to
double the power output.
8
7
6
4
5
10
9
8
7
6
3 4 5
1 - Sattelite output for either a stereo left satellite or two mono
satellites.
CAUTION: only the COMPACT500 satellites can be
connected via this output.
CAUTION
2- Power switch
3 - Voltage selector: Allows you to adapt the voltage of the ampli-
fier to the voltage of the electrical outlet.
4 - Fuse: Protects the power supply module and the built-in
amplifier.
If need to replace the fuse, please make sure the new fuse has
exactly the same characteristics.
5- Power input socket: Allows you to connect the speaker to
an electrical outlet. Use the supplied IEC cord, and make sure
the voltage delivered by the outlet is in adequation with the
value indicated by the voltage selector before turning on the
built-in amplifier.
6- Output for stereo right satellite.
CAUTION: only a COMPACT500 satellite can be
connected via this output.
CAUTION
7- Satellites storage compart
8- Clamping knob to secure the satellite once in its compart-
ment. Use the insert at the rear of the satellite to tighten it
safely.
1 - CH1 input via balanced COMBO
Connect here an XLR or JACK plug from a line level music
instrument or a microphone. The signal of this mono input
is spread across the right and left output of the system.
2 - CH2 inputs via balanced stereo COMBO
Connect here XLR or JACK plugs from a line level
music instrument. The left channel can be used by a
microphone.
3- CH3 inputs via RCA and stereo Jack 3.5
Connect an external player or a line level instrument via
RCA. The AUX input allows you to connect via stereo
Jack 3.5 any extra line level source.
4- Balanced L and R line level outputs
Allows you to retrieve the incoming signal to transmit it
(e.g. to active speakers).
Depending on the selector No. 7, the output will only
transmit the signal of channel 2, or of the whole system.
English
-
Page 5