Addonics Technologies NAS25HDU2 Quick Install Manual - Page 2
Browse online or download pdf Quick Install Manual for Storage Addonics Technologies NAS25HDU2. Addonics Technologies NAS25HDU2 4 pages. Mini nas
Also for Addonics Technologies NAS25HDU2: User Manual (8 pages), User Manual (13 pages)
Print Page
Mini NAS connected directly to a computer's NIC card
If you connect the mini NAS to a computer directly, the will act as a DHCP
server, assigning itself an IP address automatically and will also assign an IP
address to the computer's network card. This configuration will not enable you to
see the drive on the network.
Mini NAS connected to a Router or Switch
When the mini NAS is connected to a LAN network with an active DHCP server,
it will obtain an IP address from DHCP server automatically. Or if your LAN
network does not have an active DHCP server, mini NAS will immediately act as
DHCP server and assign itself an IP address for installation
II.
Search mini NAS using SDisk Utility
1.
Browse the CD enclosed in the product package. Copy and paste "SDisk
Utility" in to your computer then double click the icon to start search.
Note:
"SDisk utility" was written with JAVA script, please make sure your
computer has installed JAVA before, if not please install the JAVA JRE
from the CD drive.
2.
When mini NAS has been found, click "Connect" to enter web GUI utility.
Open mini NAS web GUI by using web browser.
1.
Open web browser and type default host name "storage" in the
search bar.
2.
Default login is "admin" for both User name and password. Click
"OK" to enter configurations.
Identification
You can change and modify your host, group name and password from this
page. Click "Apply" to save the setting.
Host name: This is used to identify your device on the network. If you prefer
a different name, type in the new name and click "Apply" to save setting.
Group Name: This should be the same as your workgroup. In general, the
default "WORKGROUP" will be OK. But if your workstation belongs to
different workgroup, type in the correct group name to modify.
For Window OS, right click on "My computer" and choose "Properties", go to
the computer name tab to see your current workgroup.
If using a Mac OS system, to join a Windows workgroup, open the directory
access utility (under Applications-> utilities). Select SMB and click configure to
modify the settings (administrator access required to access this option.)
Note: We strongly suggest you to change the password as soon as you logged
in, to prevent unauthorized access.
Date/ Time Setting
You can change time setting from this page. Clicks "Apply" to save the setting.
By default SNTP is set to Network Time Service otherwise select synchronize to
PC. If internet access is available, we recommended setting SNTP to Network
Time Service instead.