audiophony 9982 User Manual - Page 9

Browse online or download pdf User Manual for Stereo System audiophony 9982. audiophony 9982 12 pages. Runner series
Also for audiophony 9982: User Manual (12 pages)

Print Page

CROSSER -180W BATTERY-OPERATED MODULAR SOUND SYSTEM

6 - Power management

6 - 1 : Description of the power management system

1 - Indicators: They indicate the charge level from FULL to LOW.

PW indicates the RUNNER is active.

You must change the battery as quickly as possible when the

LOW indicator is lit.

2 - DC Input: Allows you to connect an external DC power supply

unit (24V 2.5A). Please respect the polarity (+ in the middle).

Note about batteries:

Please use the original battery. If need to replace the battery, use a

model with the same characteristics.

Please charge the batteries before using them for the first time. The

RUNNER is designed to charge two batteries at a time.

In order to preserve the batteries, turn the device off when you are not using it.

The battery can be severely damaged it is totally emptied by an inactive system.

Moreover, the batteries must be regularly recharged to prevent it from drying.

The batteries are considered wearing parts and are not covered by the warranty.

6 - 2 : Replacing the CROSSER batteries

Red

Notes :

- Caution: Please make sure to position the batteries properly, as described on Figure 2, as your device can be

damaged by an improper positioning.

- New batteries must be fully recharged before being used. The green indicator flashes during the charging

process and the FULL indicator remains lit when the battery is fully charged.

Black

1 - Turn OFF your CROSSER.

2 - Open the rear access hatch as

described on Figure 1.

3 - Remove the used batteries.

LINE IN

4 - Install the new batteries in their

compartment.

WIRELE

PRIORI

SS MIC.

OFF

5 - Position the batteries as described on

Figure 2.

6 - Make sure the battery is in position and

close the hatch.

English

Page 9