Audiophony PA AMP660 User Manual - Page 11
Browse online or download pdf User Manual for Amplifier Audiophony PA AMP660. Audiophony PA AMP660 13 pages.
Print Page
AMP660/AMP1000 - High Power Public Address Amplifiers
Special case of the AMP1000 output terminal block
The AMP1000 has a 120V output.
This output is used to supply power to long installations to avoid voltage drops.
However, if your installation is of normal length, it is preferable to use the 100V output.
For information: 20V of voltage drop is equivalent to a cable length of 100m for a 2.5mm² section. It is
nevertheless advisable to check the voltage at the terminals of the speakers.
Transformer
100V speaker or ceiling speakers
5 - Technical specifications
ELECTRICAL CHARACTERISTICS
Power
(4 Ohms)
Input voltage
Crosstalk
Frequency response
Signal to noise ratio
T.H.D at 1 KHz 10V (power rating)
Output impedance (OUTPUT)
Output voltage
Power supply
PHYSICAL FEATURES
Cooling
Dimensions (L x P x H)
Poids net
Transformer
AMP660
660 Watts
Line 0.775V/1KHz
More than 70 dB
Higher than 75dB
70V / 100V
485 x 320 x 90 mm
19" 2U
19 Kg
COM COM
4~16Ω
70V
AMP1000
1000 Watts
60 Hz - 20 KHz
0.25%
600 Ohms
70V / 100V / 120V
AC230V, 50Hz
By fan
485 x 455 x 132 mm
19" 3U
23.5 Kg
Français
100V 120V
Page 11