Consort CSL2SR Installation & Control Manual - Page 3
Browse online or download pdf Installation & Control Manual for Heater Consort CSL2SR. Consort CSL2SR 4 pages. 2kw convector heaters for sl wireless controllers
Also for Consort CSL2SR: Installation & Control Manual (4 pages)
Print Page
Operation
This heater can only be used when connected to a SL
Wireless Controller. Each SL controller can control any
number of heaters providing they are in the RF range.
The heater has an indicator light positioned on the
fascia panel. The light may be:
Green
-
when no heat is needed
Red
-
when the heater is on full power
SLPB
SLVT
Please refer to the SL user and operating instructions for
full operational details.
CSL2SC
SLTI
SL wireless controllers
Wall Mounting
The heater must not be located immediately below a
fixed socket outlet.
The Wall Mounting brackets are packed separately in
the carton. Fit the top mounting brackets to the wall
at the height and centres shown in the diagram.
Withdraw the two feet-securing screws from the base
of the heater and use these screws to secure the
right-angled brackets to the base of the rear panel of
the heater in the correct holes. These are the holes in
the two protruding lugs.
Mount your appliance onto the top brackets via the
two slots in the rear panel. Secure the bottom
brackets to the wall as shown.
WARNING: THIS APPLIANCE MUST BE EARTHED
IMPORTANT: ALWAYS RETAIN YOUR USER INSTRUCTIONS
FOR FUTURE REFERENCE
CSL2SR
3
62001222 Iss 01