AudioPressBox APB-P112SB Owner's Manual - Page 2
Browse online or download pdf Owner's Manual for Amplifier AudioPressBox APB-P112SB. AudioPressBox APB-P112SB 6 pages. Press conference audio distribution amplifier
Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages,
fire or other hazards. These precautions include, but are not limited to, the following:
WARNING
Do not open
•
Do not open the device or attempt to disassemble the internal parts or modify them in any way. The
device contains no user-serviceable parts. If it should appear to be malfunctioning, discontinue
use immediately and have it inspected by qualified AudioPressBox service personnel.
Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the device or other property.
These precautions include, but are not limited to, the following:
CAUTION
Location
•
Before moving the device, remove all connected cables.
•
When setting up the device, make sure that the AC outlet you are using is easily
accessible. If some trouble or malfunction occurs, immediately turn off the power switch
and disconnect the plug from the outlet.
•
Avoid setting all controls to their maximum. Depending on the condition of the connected
devices, doing so may cause feedback and may damage the speakers.
•
Do not expose the device to excessive dust or vibrations, or extreme cold or heat (such
as in direct sunlight, near a heater, or in a car during the day) to prevent the possibility of
panel disfiguration or damage to the internal components.
•
Do not place the device in an unstable position where it might accidentally fall over.
XLR-type connectors are wired as follows (IEC60268 standard): pin 1: ground, pin 2: hot (+), and pin 3: cold (-).
AudioPressBox cannot be held responsible for damage caused by improper use or modifications to the device, or data that is lost or destroyed.
The performance of components with moving contacts, such as switches, volume controls, and connectors, deteriorates over time. Consult qualified AudioPressBox service personnel about
replacing defective components.
Illustrations herein are for explanatory purposes only, and may not match actual appearance during operation.
Company names and product names herein are trademarks or registered trademarks of their respective companies.
Specifications and descriptions in this owner's manual are for information purposes only. AudioPressBox reserves the right to change or modify products or specifications at any time without prior
notice. Since specifications, equipment or options may not be the same in every locale, please check with your AudioPressBox dealer.
2
Water warning
•
Do not expose the device to rain, use it near water or in damp or wet conditions, or place
containers on it containing liquids which might spill into any openings.
•
Never insert or remove an electric plug with wet hands.
Connections
•
Before connecting the device to other devices, turn off the power for all devices. Before
turning the power on or off for all devices, set all volume levels to minimum.
Handling caution
•
Do not insert your fingers or hands in any gaps or openings on the device.
•
Avoid inserting or dropping foreign objects (paper, plastic, metal, etc.) into any gaps or
openings on the device If this happens, turn off the power immediately and unplug the
power cord from the AC outlet. Then have the device inspected by qualified AudioPressBox
service personnel.
•
Do not rest your weight on the device or place heavy objects on it, and avoid use excessive
force on the buttons, switches or connectors.