Conspec Controls CN Series Operation & Maintenance Manual - Page 2
Browse online or download pdf Operation & Maintenance Manual for Transmitter Conspec Controls CN Series. Conspec Controls CN Series 18 pages. Universal transmitter
Print Page6 Guttman Boulevard, Charleroi Industrial Park, Charleroi Pennsylvania 15022
Warranty & Disclaimer Information
Due to Conspec Controls Inc.'s continuous effort to produce the highest quality monitoring
equipment possible, products described in this manual are subject to change at any time without
notice. While every effort has been made in preparing this manual to include all information
pertinent to the installation, maintenance, and calibration of the product, Conspec Controls Inc.
assumes no responsibility for errors, omissions, or any loss due to said errors or omissions.
A gas monitoring system alone cannot prevent hazardous conditions from occurring. The reliability
of a gas monitoring system, and the resultant safety level is dependent on, and the responsibility of
the user. The user's responsibilities include, but are not limited to:
*Insuring that the correct equipment is specified for conditions at the particular site
*Following recommended installation and wiring guidelines
*Meeting all applicable safety and electrical codes
*Scheduling regular calibrations and servicing
*Replacing inoperative or questionable parts or units
WARRANTY
Conspec Controls Inc. provides warranty service for one (1) year from the shipping date on all
electronic and mechanical components. Sensor elements are considered a consumable part
subject to varying conditions which can affect their expected life. Sensor elements are covered
under warranty for a period of six (6) months. Damage to sensor elements due to overexposure of
the target gas, poisoning, or other factors beyond Conspec's control are not covered under
warranty. Warranty service is limited to defects in materials and workmanship on units which fail
under normal use. Conspec will repair or replace any unit found to have failed due to defects in
materials or workmanship. This warranty is voided if the unit has been misused, damaged due to
incorrect wiring, or altered before return to the factory. Warranty claims that are denied will be
billed at the standard rate. Expedited shipping is not covered under warranty.
No other warranty is authorized other than the above.
Before returning a product for service, call Conspec Controls Inc. for a Return Authorization
Number (RA#) at (800) 487-8450. Returned units should be packaged securely as damages
incurred during shipping are not covered under warranty.
(800) 487-8450; Fax: (724) 489-9772
Page 2 of 17
http://www.conspec-controls.com