Dantherm CDF 70 Manual - Page 2

Browse online or download pdf Manual for Dehumidifier Dantherm CDF 70. Dantherm CDF 70 6 pages. Replacing rh/t sensor
Also for Dantherm CDF 70: Quick Installation (12 pages), Service Kit Instructions (12 pages)

Print Page

Mount the humidity sensor on the bracket with PPI filter

and two cable binders as shown.

Remount the front and make sure the sensor is visible

through the grille.

Download latest software version

Insert the USB memory dongle in the USB port of the control

panel of the unit. The unit will now auto detect the new

software and install it.

The installation process should take no more than 30

seconds.

In the process a log file is stored on the USB memory dongle.

If you wish to read the log file but not update the software,

just insert an empty FAT32 USB memory dongle and a log file

will be downloaded.

NB: If the download procedure doesn't succeed, the unit

might have the newest software installed already.

Note: the white surface and hole in the sensor must be

facing front.

USB

RS485

EXT RH/T

RUN

FAIL

HEAT1 HEAT2

ALARM

12V DC